Nov 15, 201203:38 PM
Swing Set: Cruising Full Time
Upon Further Review...
(page 1 of 2)
When I make a mistake, I have no need to tell on myself because only Rosie and I would be the only ones who knew about it. But the truth is the truth, and after reflecting on our recent anchor losing incident, I have come to the conclusion that our anchor line did not break at the rope/chain splice, but instead the rope got cut when I inadvertently ran over it. Yes, I ran over my own anchor line. I decided that this is what happened by examining the remaining anchor line. There was no evidence of the splice, which part of would still remain if the line separated there.
By using the saved track on our chartplotter, we went back to the scene of the crime on Monday with our friends Gary and Judy. Gary and I used a small anchor to drag the area behind the dinghy. We didn't find the anchor, but have not entirely given up yet.
How could this happen to such as an experienced boater such as I? Let's call it a momentary lapse in judgement and just move on, OK?
We had been flying an old bikini top from the mast on the dinghy for the last two years or so, and we had to retire it this week. The garment was becoming unrecognizable, but was still receiving agreeable comments from most people who did realize just what it was. You can't tell from the picture, but I put our Duck Club burgee in its place, a parting gift from Sonny Robbins at our Bon Voyage Party.
Rosie and I took Holly for a walk to the Sea and Shore store on Tuesday and ordered a new Delta anchor from the proprietor, Dick. The price couldn't be beat on a new Delta anchor, and he promised to have it in by the next day. The Delta is stock equipment on our boat and is self deploying, meaning the anchor will fall off of the bow pulpit once you undo the safety lanyard and let some rode out. I had considered a Rocna anchor, which is similar in shape to the Delta, but Dick didn't have a good supplier for the Rocna. A Bruce type anchor is liked by some, but the shank is straight and the anchor won't self deploy. I also had concerns about the blade tips on a Bruce anchor coming into contact with the bow when it is retrieved.
Although we have two Danforth type anchors that we have on deck, to be used as spares or when we need to deploy a stern anchor, a Danforth in our environment is not a good choice, especially if you just use a single anchor. When you have tidal currents that change in opposite directions several times a day, the Danforth can be pulled out, where the Delta will "spin" more or less and stay dug in. The Danforth will also not hold in grass, but you don't want to anchor in sea grass, anyway. I'll swear by a Danforth in the sand in a constant river current, but not here in this environment. Sorry James.
After our visit to Sea and Shore, where I also had to buy a new float switch for our aft bilge pump, we went to the grocery store and picked up a few things. I waited outside of the store and held Holly at bay while she barked at everyone that walked by. She has not learned that cute is not loud. On the plus side, Holly has become very accomplished on the leash, prancing along at a fast pace. When we get to a street crossing, she knows she is going to be picked up and carried across, so she sits at the proper moment and doesn't make me work at snatching her up. On a side note, she is also coming along nicely in our effort to train her to do her business on the swim platform without the aid of fake grass or potty pads. The money we'll save in potty pads alone will make us rich.